 |
911 Power
Brakes
These calipers are made by ATE which is the original
equipment manufacturer for PORSCHE. The FRONTS are 4 piston
and 50% larger than "S" or "SC" and bolt right on!
The REAR pad size is 93% the size of 911 S or 50% bigger
than stock.
With stainless steel lines you get REAL STOPPING POWER!
JUST BOLT ON
-
Kit includes 4 calipers with pads
-
Upgrade pads are available FR & RR |
$999 |
 |
356 C
POWER BRAKES
These calipers are made by ATE which is the original
equipment manufacturer for PORSCHE
The pad is 93% the size of the 911 S which is about 50%
bigger than stock. They can be put on FRONT with a 19mm
master cylinder.
With stainless steel lines you get REAL STOPPING POWER!
JUST BOLT ON
-
Kit includes 2 calipers with pads
-
Upgrade pads available |
$399 |
 |
914 POWER BRAKES
These calipers are made by ATE which
is the original equipment manufacturer for PORSCHE
The pad is 93% the size of the 911 S which is about
50% bigger than stock. They can be put on FRONT with
a 19mm master cylinder.
With stainless steel lines you get REAL STOPPING
POWER!
JUST BOLT ON
- Kit includes 2 calipers with pads
- FR./R.
|
$399 |
 |
911
914 COIL OVER KITS
These coil over kits fit Boge and Bilstein FRONT struts.
This kit comes with springs purchase and caps. We offer a
large selection of spring weights for fine tuning your car.
914 REAR coil over kits fit Bilstein and Koni shocks. The
kit comes with springs purchase and caps, with a large
selection of spring weights. |
Front
- $350
Rear - $250 |
 |
356
PISTONS SETS
These pistons are made of forged high silca aluminum. They
weigh 25% less than stock ones, that is like throwing one of
your stock ones away! We can make almost any bore and
compression ratio for STREET & RACE
-
This includes light weight Pins and Rings.
-
Cylinders and boring available. Call for prices |
Set of four
- $650 |
 |
911
PISTONS SETS
These pistons are made of forged high silca aluminum. They
weigh 25% less than stock ones, that is like taking one &
half stock ones out!
We can make almost any bore and compression ratio for STREET
& RACE
-
This includes light weight Pins and Rings.
-
We can provide several dome configurations. |
Set of six -
$1000 |
 |
914
PISTONS SETS
These pistons are made of forged high silca aluminum. They
weigh 25% less than stock ones, that is like throwing one of
your stock ones away! We can make almost any bore and
compression ratio for STREET & RACE
-
This includes light weight Pins and Rings.
-
Cylinders and boring available. Call for prices
|
Set of four
- $650 |
 |
914
HORIZONTAL FAN
This new fan system is a must for RACING! Our system
is electric, so it doesn't steal HP from the crank, it adds
10% HP over the 911 type and 20% HP over stock. The fan air
output is 1250 cfm and directs more than stock over the
cylinders & heads. This system weighs 5 lbs is 22lbs lighter
than stock. Throttle response is greatly increased, and with
our RACE flywheel its bye to your competition! |
$500 |
 |
914
RACE FLYWHEELS
This flywheel is a must for RACING! Our racing flywheels are
new stock OEM, and is CNC machined to 7.5 lbs, then
balanced. Throttle response is greatly increased, and with
our 914 HORIZONTAL FAN system, you can say goodbye to your
competition!
We also make a 10lb street flywheel - $350 |
$550 |
 |
914
COUNTERWEIGHT CRANKS
These cranks are made from stock OEM. They are shot peaned,
counter weighted and balanced. Great for hi-revs on the
Street or Racing. These cranks will help smooth and prolong
your engine life! Exchange |
$350 |
 |
914
HI-REV RODS
These rods are made from stock OEM. They are shot
peaned, rebushed, rebored, SPS bolts installed, lightened,
and balanced. These rods are good to about 7500 RPMS.
They are great for Street or Racing. Oil grooves can be
added for better piston wrist pin oiling and cooling (SQUITTERS)
Set Exchange |
$400 |
 |
356
911 914 FIRE SYSTEMS
Fire Charger extinguishing systems is a AFFF type (Foam)
Here are some benefits of foam:
1. Prevents flashback (Halon can do this)
2. Extinguishes fire promptly (By coating it)
3. Inexpensive to recharge ($50 you do it)
4. Non-toxic, and environmentally friendly
5. SCAA, FIA, VINTAGE, PCA approved
-
This system can save you and your car!
-
We have 2.75 and 5.0 liter sizes |
2.75 - $325
5.0 - $425 |
 |
914
SERVICE GUARD
Protect your 914 with this professional quality padded vinyl
guard. Keeps fluids, tools, parts, and YOU from damaging
your paint! |
$75 |
 |
914 -
S GT ENGINE LID
We have duplicated the Peter Gregg GT lid.
This lid gives you twice the air flow and it is about 1/3
the weight of a stock one. The best thing is IT LOOKS GOOD!
They are flat black and uses original mounts and latches.
Exchange |
$250 |
